INNOVATIONS
Case/IH John Deere Gleaner New Holland Massey


To see the following
parts installed, click
On The Combine


C A S E / I H

AFX ROTOR FRONT KIT
AFX Rotor Front Kit
click to see part on the combine
NEW Loewen AFX Rotor Front Kit for Case/IH 40/60 & 80 series now available!

AFX Rotor Front Kit features:
- Smooth and even feeding.
- More consistent material flow.
- Reduced horse power requirements.
- Increased capacity.

Benefits of a Loewen AFX Kit:
- Smooth, solid OEM-style cone for even material distribution. No recessed areas, which can cause material build up.
- Hardened leading edge on impeller flighting for longer wear.
- Loewen or OEM bolt on impeller inlet flighting make repairs easy.
- All the benefits of a complete AFX rotor, without the cost!

Click to download the Instruction Sheet for RFAFX60 kit
Click to download the Instruction Sheet for RFAFX80 kit

SPRING LOADED CONCAVE SHOCK KIT
Spring Loaded Concave Shock Kit
click to see part on the combine
The Shock Kit is designed to reduce or prevent damage to your concaves, pipes and rotor. The heavy duty compression springs absorb the shock caused by a foreign object or large amounts of material going through the threshing area.

HELICAL BAR CONCAVES
Helical Bar Concaves The NEW Loewen Helical Bar Concave features angled cross bars for more aggressive threshing. This unique concave is designed to prevent whiteheads or unthreshed grain in hard to thresh crops.


Used primarily in wheat in the first concave position, material enters the rotor and strikes the cross bars at a right-angle which hits the heads hard and breaks up any straw that could interfere with the separation of the grain. The Helical Concave has also been used in the third concave position to reduce rotor losses in small grain.


Operators report reduced horsepower requirements, wider concave settings, longer harvest hours and slower rotor speeds.

POSIFEED ROLLERS
Case/IH Posifeed Roller
click to see part on the combine
This revolutionary NEW feeder chain drum is designed to improve feeding, reduce loses and increase speed!

In side-by-side testing with standard drums, the Posifeed Roller consistently delivered superior results. This innovative new drum was developed by a farmer with extensive research on a variety of combines.

Features include:
- Unique paddles which provide more aggressive feeding.
- Feeds more evenly in light or heavy crops.
- Increases harvesting speed.

ROTOR CONE & TRANSPORT VANES
Rotor Cone & Transport Vanes Vanes available in Standard 1/8", Heavy Duty 3/16" Vanes for added strength, and Longer Wearing 3/16" Stainless Steel Vanes which are installed with hard surface T bolts.

J O H N D E E R E

HELICAL BAR CONCAVES
Helical Bar Concaves The NEW Loewen Helical Bar Concave features angled cross bars for more aggressive threshing. This unique concave is designed to prevent whiteheads or unthreshed grain in hard to thresh crops.


Used primarily in wheat in the first concave position, material enters the rotor and strikes the cross bars at a right-angle which hits the heads hard and breaks up any straw that could interfere with the separation of the grain. The Helical Concave has also been used in the third concave position to reduce rotor losses in small grain.


Operators report reduced horsepower requirements, wider concave settings, longer harvest hours and slower rotor speeds.

CONCAVE SHOCK KITS
John Deere STS Concave Shock Kit
click to see part on the combine
The NEW Loewen Spring Loaded Concave Shock Kits are now designed for John Deere STS combines!

Concave Shock Kit reduces or prevents damage to the concaves, pipes and rotor. The heavy duty compression springs absorb the shock caused by foreign objects or large amounts of material going through the thrshing area.

Kit includes metric rods and hardware to match OEM installation requirements.

POSIFEED ROLLERS
John Deere Posifeed Roller
click to see part on the combine
This revolutionary NEW feeder chain drum is designed to improve feeding, reduce loses and increase speed!

In side-by-side testing with standard drums, the Posifeed Roller consistently delivered superior results. This innovative new drum was developed by a farmer with extensive research on a variety of combines.

Features include:
- Unique paddles which provide more aggressive feeding.
- Feeds more evenly in light or heavy crops.
- Increases harvesting speed.

VERTICAL UNLOADING CLEAN OUT SPOUT
Vertical Unloading Clean Out Spout
click to see part on the combine
For 9000 series, STS series, CTS & CTS II combines.
The NEW Loewen plastic Clean Out Spout provides easy access to the clean out housing at the bottom of the vertical unloading auger. The large spout reservoir allows unwanted material and moisture to clear, preventing buildup and rust on the elevator housing. A slide out door makes removal of trash quick and easy.

STS ADJUSTABLE PRECLEANER
STS Adjustable Precleaner STS Adjustable Precleaner Gear STS Adjustable Precleaner Louvres & Nylon Cushions The NEW Loewen STS Adjustable Precleaner offers you greater flexibility and performance!

John Deere STS combines include a rigid precleaner that is pre-set for corn. This wide setting causes loss of material through the precleaner when small grain crops are harvested.


The
Loewen Adjustable Precleaner allows you to fine tune your louvres for the specific crop that you are harvesting - providing you with better separation and a cleaner sample.


Adjustments are made with a crank that fits over the adjustment gear - count your turns for precise settings.


The Adjustable Precleaner features Nylon Cushions in each wire hole to reduce friction, wear and breakage. Individual
replacement louvres, wires and nylon parts make repairs easy!

G L E A N E R

DISCHARGE BARS
Discharge Bars click to see part on the combine For Gleaner combines. Prevents wadding and plugging at the discharge end of the separator cage. The Loewen Discharge Bars increase the natural feeding action of the cylinder by extending the rasp bar.


Eight bars required - works best with four short and four long. Available in Hardened or Chrome.

AUGER UNLOADING COLLARS
Auger Unloading Collars Features nylon rotating plates instead of ball bearings to eliminate clogging and to reduce abrasive friction.

POSIFEED ROLLERS
Gleaner Posifeed Roller
click to see part on the combine
This revolutionary NEW feeder chain drum is designed to improve feeding, reduce loses and increase speed!

In side-by-side testing with standard drums, the Posifeed Roller consistently delivered superior results. This innovative new drum was developed by a farmer with extensive research on a variety of combines.

Features include:
- Unique paddles which provide more aggressive feeding.
- Feeds more evenly in light or heavy crops.
- Increases harvesting speed.

N E W H O L L A N D

POSIFEED ROLLERS
New Holland Posifeed Roller
click to see part on the combine
This revolutionary NEW feeder chain drum is designed to improve feeding, reduce loses and increase speed!

In side-by-side testing with standard drums, the Posifeed Roller consistently delivered superior results. This innovative new drum was developed by a farmer with extensive research on a variety of combines.

Features include:
- Unique paddles which provide more aggressive feeding.
- Feeds more evenly in light or heavy crops.
- Increases harvesting speed.

Home I Dealers I History I Contact I Farm Show Schedule I Innovations I What's New
Cylinder Bars I Concaves I Chaffers I Chains I Rotary Parts I Augers I Walkers

Copyright © 2009 Loewen Manufacturing all Rights Reserved.
All contents including data and images may not be used without the express written consent of Loewen Manufacturing.
Files may be downloaded for personal viewing but must not be uploaded on the Internet or reproduced in print, for public viewing.